Description

Product Specifications

• Screen : ≤24″
• Capacity : ≤25 lbs
• Lift : 25”
• Pan : 180°
• Rotation : 360°
• Vesa : MIS-D
• Part Number: 24-392-026
• Includes arm, desk clamp, grommet mount, monitor riser, crossbar bow, monitor pivots (2), keyboard tray support bracket, worksurface, keyboard tray, assembly fasteners, Velco, cable wrap, adjustment tools
• NOTE: Extra-long cables may be required to span between standing and sitting heights
• * Weight Capacity: Maximum total load on height-adjustment assembly ≤ 25 lbs (11.3 kg). LCD weight = 4.5–10 lbs (2.0–4.5 kg) each, worksurface ≤ 5 lbs (2.3 kg), keyboard tray ≤ 2 lbs (.9 kg). For proper operation the total maximum weight when added together should not exceed 25 lbs (11.3 kg)
• † Lift Range: LCD and keyboard adjust 20″ (51 cm) in tandem; LCD adjusts 5″ (13 cm) independently; maximum LCD height adjustment = 25″ (63.5 cm)
• When in seated position, keyboard tray can drop down ≤ 4″ (10 cm) below level of desktop surface, placing the keyboard at the optimum ergonomic height
• Mounting Surface Requirements: When installed using Desk Clamp option, can be configured to work with desk surfaces up to 31.5″ (80 cm) deep. When installed using Grommet Mount option, center of through-hole should be no more than 29.5″ (75 cm) from front edge of desk surface. These requirements ensure that the suspended keyboard tray can extend past the desktop’s front edge
• Keyboard tray can be installed in 3 different positions: centered, offset right or offset left
• Keyboard tray designed with slight tilt to ensure wrists remain in a neutral position during data entry and help prevent repetitive stress-injuries; tray can be flipped up 90º when not in use
• Keyboard Tray Dimensions: 27.1″W x 10.1″D (688 x 256 mm)
• Integrated cable management hides wires
• Worksurface Dimensions: Approximately 0.25″H x 22″W x 10″D (6.4 x 560 x 255 mm)
• Desk clamp attaches to edge up to 2.5″ (65 mm) thick; grommet mount attaches through hole 0.5″ to 2.5″ (7–65 mm) wide and up to 2.5″ (65 mm) thick
• Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
• Can be configured to hold a laptop alongside a monitor: order Conversion Kit (97-617)
• ** A Washington State analysis of case studies related to office ergonomics showed a median productivity increase of 12% following an ergonomic intervention. New studies from the Office Ergonomics Research Committee (OERC) suggest that employees who are provided with well-designed ergonomic furniture and are trained to use it see an average productivity increase of 18%
• This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)
• Shipping Dimensions: 36″ x 21.25″ x 10.75″ (941 x 540 x 273 mm)
• Shipping Weight: 48.5 lbs (22 kg)
• This product is of Arm Category.